Small In Stature, Big On Results

Vector Discreet is the new versatile low profile insect light trap addition to the Prescription Treatment brand Vector line. Vector Discreet combines the patented translucent technology of the Vector Super Nova with a 26-watt bulb. This combination gives the maximum UV (ultraviolet) light output for fantastic insect attraction. This small unobtrusive Vector insect light trap, 14 1/2" long and 7 1/4" wide provides 74 square inches of catch surface on its two hidden glue boards, keeping the captured flies from the customer's view. For discreet control of flying insects in public areas you can rely on Vector Discreet.

Superior Performance

Whitmire Micro-Gen designed Vector Discreet with a hidden reflective plate, traslucent lens, neutral gray cover, and 26-watt bulb so that it would perform as well as larger units. The reflective plate directs all the UV light out the front of the unit through the lens, maximizing the bulb's effectiveness. The arced translucent lens evenly disperses both the direct and reflective UV light in several directions from the front of the Vector Discreet while the gray cover gives the unit the contrast increases fly attraction. The 26-watt bulb is almost as powerful as the two standard bulbs of the larger units. Add these features up and the benefit is superior control of flies.

Vector Discreet Is Discreet

The Vector Discreet is designed to provide quick control of flies without being noticed and blends into a variety of decors due to its small size and light gray cover. The translucent lens disperses the UV light evenly creating a subtle glow that is easy on the eyes. Vector Discreet can be mounted on the wall and placed vertically or horizontally on a shelf to fit into any room. The two glue boards are attached to the cover, keeping them hidden from view even during servicing.

Servicing the Vector Discreet

Vector Discreet can be easily serviced within minutes thus minimizing the chance of the public viewing your catch. After unpluging the unit, simply lift the side edge off the metal frame and the entire cover will come off. The glue boards will remain inside the disconnected cover. Once you have recorded your monitoring counts, dispose of the glue boards in a garbage receptable away from the public's view. To replace the glue boards with two new Vector Discreet glue boards, secure the glue boards in the cover and then pull the release paper off. Place the cover over the metal frame and gently push the cover on until the clips lock.

To replace the lamp, unplug the unit and lift the cover off the frame exposing the lamp. Gently disconnect the old lamp by pulling it slowly out of the socket. Replace with a new lamp by gently pushing the prongs into the sockets until secure, reconnect the cover and plug in the unit.